← Customer stories
Pagani

CUSTOMER STORY

Where Art Meets Science: Pagani takes vehicle analysis from a week to less than a day with MOVEdot

Pagani’s vehicle dynamics engineers use MOVEdot to investigate questions that long remained out of reach because of the time and effort a proper answer needed. They run those investigations in parallel and with the whole car in view, to balance comfort and track performance in one hypercar.

Industry
Automotive, Hypercars
Team
Vehicle Dynamics
Capabilities used
Knowledge system · Workflows · Apps · Simulation and local software · Skills

Outcome

1 week to less than a day

From about 1 week to less than a day to build a new vehicle analysis workflow

Outcome

~6,000

About 6,000 damper variants compared in a few hours

About Pagani

Pagani Automobili is an independent Italian automotive manufacturer, founded in 1998, renowned for designing and producing some of the most exclusive Hypercars in the world.

The setting

One car, several souls

A Pagani is a perfect blend of several souls. A Customer should be able to cruise a coast road in superlative comfort, drive to a racing circuit, set a fast lap and drive back home. All of it happens in the same car, with the same tires and the same brakes, at the turn of a driving-mode selector.

At Pagani, the Art is the driving experience the Team imagines, and the Science is the analysis needed to deliver it. Requirements this far apart pull the car in opposite directions, and the best setting for one system is rarely the best for the whole vehicle. To reach the global optimum for the car, the team has to try many different directions.

We design the Pagani driving experience as a precise balancing act between two seemingly opposing priorities: ride comfort and handling. We have harmonized these demands to perform effortlessly across an ever-broader range of conditions.
Franco Morsino, Head of Vehicle Dynamics, Pagani

The challenge

Questions that never get answered

Every direction is an investigation, and every investigation has an entry cost. The expert has to work out the method, find or build the tooling, implement and debug it against the team’s own data and models, validate it and extract the metrics, all before knowing whether the answer was worth the effort and as useful as hoped. That takes anywhere from a week to more than a month. One example is measuring how much time is lost in each braking zone, compared with the grip the tires had available.

So the question is never answered. The team commits to a shortlist of simulation and development directions, without knowing how close the results are to the global optimum.

I estimate a week of my work to develop an analysis like the one on braking ‘lost time’, and then I would use it a handful of times. Is it really worth doing?
Nicolò Baraldi, Vehicle Dynamics Engineer, Pagani

The solution

More directions, explored in parallel, connected to the whole car

moveOS, MOVEdot’s operating system for engineering, connects a team’s test data, models, simulation software and knowledge so that AI agents can work across all of them. At Pagani, the engineers lead every investigation and the agents work alongside them on the build-and-run work. The engineers set the question and the targets, review every result and make every decision, and the platform gives them what they need to validate it.

Three things change.

More directions can be explored

The team sets the vision, the target and the state-of-the-art method. The agent works with them to refine the methodology, builds the analysis on Pagani’s own data and models, runs it and reports back. It also suggests approaches the team might not have considered.

It’s like having a new colleague who knows each type of analysis that exists in the world.
Nicolò Baraldi, Vehicle Dynamics Engineer, Pagani

They run in parallel

Engineers cannot multiply themselves, but agents can run as many investigations at once as the team needs. One study can compare thousands of variants.

We would lose months just understanding how to build some simulations and get the useful results with a generic tool.
Nicolò Baraldi, Vehicle Dynamics Engineer, Pagani

Everything stays connected to the whole car, and between colleagues

A centralized knowledge system manages what the team learns, across time, vehicle systems and knowledge areas. One engineer’s findings are available for a colleague’s next study with no handover, and the agent checks each proposal against the rest of the car.

moveOS brings these capabilities together:

Knowledge system
Manages the team’s engineering knowledge centrally, from control logic and calibrations to past findings.
Workflows
Where the team’s data pipelines live. They are triggered automatically after each test session and save the results to databases.
Apps
Engineers build the tools they want, such as dashboards to compare test results.
Simulation and local software
Agents operate a team’s own simulation software where it runs, on a workstation or an HPC cluster.
Skills
A method that works is saved once and reused by the whole team on new data.

In practice

Three investigations

The question
In each braking zone, how much of the available grip did the driver use, and how much lap time does the gap represent?
Why it wasn’t being tackled
About a week to build, for an analysis used a handful of times.
What happened
The tire model and the vehicle data were already on the platform, so the engineers and the agent built the analysis in less than a day. It is now reused on each new session.
What it led to
An unexpected bonus. The analysis was aimed only at braking performance, but its results also pointed to ABS behavior worth a closer look. The team ran a dedicated analysis and shared it with the ABS supplier, which helped plan the next joint test.

The question
For the semi-active dampers, what is the best setting for each of the car’s characters, from the comfort mode to race, and how close is today’s calibration to it?
Why it wasn’t being tackled
With a generic tool, the team estimates it would have lost months just learning how to run the simulation.
What happened
Franco and Nicolò set the targets and steered the study, checking each method against their own expertise. The agent ran about 6,000 variants in a few hours on Pagani’s own control logic and summarized them in a Pareto analysis of comfort against track performance.
What it led to
For each mode, the team can see where today’s calibration is already close to the optimum and where it leaves performance unused.
It’s humbling, because it’s something that, in spite of all the good will, experience and dedication, you humanly cannot reach.
Franco Morsino, Head of Vehicle Dynamics, Pagani

The question
Franco needed target damping curves, fully open, fully closed and in between, to specify the hydraulics to the damper supplier.
What was already there
Nicolò’s earlier study of the vehicle dynamics control unit, its logic and its calibration tables, was documented in the knowledge system.
What happened
Franco’s study started from that knowledge without anyone passing it on. The agent recognized which damper calibration is in the car and the range of electrical current in use, and proposed hydraulic characteristics consistent with both.
The same pattern elsewhere
While optimizing the differential, the agent recalled a problem from the previous test session and proposed a solution that addressed both.
It was seamless, really integrated in our internal workflow.
Nicolò Baraldi, Vehicle Dynamics Engineer, Pagani

The impact

Where Art meets Science

Pagani’s vehicle dynamics team now answers questions that were long out of reach, and judges each answer against the whole car.

  • More variants and paths are tested

    Thousands of variants are compared where a handful were before, so the team knows where the optimum sits for each driving mode and how close the car is to it.

  • Engineers build their own tooling

    An analysis workflow that once needed a week of development now takes less than a day.

  • Decisions are made at vehicle level

    Each solution is weighed against what was learned in other systems and earlier sessions, which moves the car toward its global optimum.

  • Supplier conversations start from evidence

    Target damping curves and a dedicated analysis ahead of a joint test give suppliers a precise request.

That leaves the engineers’ time for judgment.

The Science gets broader and faster, and the Art stays with the engineers. Each of these widens the range of conditions in which the car feels right, which is the balancing act Franco describes. For him, the change “feels like real innovation.”

Our value is to interpret the result and have the wisdom to connect the dots.
Nicolò Baraldi, Vehicle Dynamics Engineer, Pagani
Our limits are no longer defined by throughput or time, but by imagination: our ability to conceive the right outcome, and discern the true value of the result.
Franco Morsino, Head of Vehicle Dynamics, Pagani

Put AI to work across vehicle development

moveOS gives AI agents the engineering tools, data and knowledge to do the work.